Project Case of Fiberglass Geogrid for Expressway Slope Reinforcement

2026/11/21 14:44

Project Case of Fiberglass Geogrid for Expressway Slope Reinforcement


Project Background

This is an excavated rock slope of a mountainous expressway. The rock mass is heavily weathered with well-developed joints and fissures. The slope surface is prone to surface spalling, slumping and shallow sliding. The region receives abundant rainfall; rainwater infiltration further reduces the shear strength of rock and soil mass. A composite protection system of **anchor bolt + fiberglass geogrid + sprayed foreign soil and hydroseeding** is adopted to achieve both slope stability and ecological restoration, replacing traditional rigid masonry protection.


Specification and Quantity

Type: Fiberglass Geogrid

Specification: Tensile strength 80kN/m, elongation ≤3%, alkali-resistant and anti-aging

Net laying area: 74,200 ㎡

Loss factor for uneven slope surface and overlapping: 11%

Total purchasing quantity: 82,362 ㎡


Functions

✅Shallow slope reinforcement: Forms a reinforced soil composite with foreign soil, restrains lateral soil deformation and prevents shallow slumping.

✅ Uniform load transfer: Transfers soil loads on the slope to the anchor bolt frame and avoids local stress concentration.

✅ Erosion control: Cooperates with hydroseeding substrate to reduce the loss of soil particles caused by rainwater runoff.

✅ Durable support: Alkali-resistant, long-term compatible with soil environment, and provides permanent skeletal support for plant roots.


Construction Parameters

Slope trimming: Remove loose dangerous rocks; the flatness tolerance of slope surface ≤10 cm.

Laying sequence: Lay from top to bottom. The main force-bearing direction of the geogrid is vertical along the slope (downslope direction).

Overlap width: Transverse overlap ≥15 cm, longitudinal overlap ≥10 cm.

Anchorage: Fixed with matching anchor bolts / anchor nails; anchor nail spacing: 1.5 m transversely, 1.5 m vertically.

Hydroseeding: Spray foreign soil after the geogrid is closely attached to the slope, with a thickness of 8~10 cm, followed by vegetation maintenance.