Why Fiberglass Geogrid Is Ideal for Old Road “White to Black” Renovation
Why Fiberglass Geogrid Is Ideal for Old Road “White to Black” Renovation
“White to black” refers to the popular renovation of old cement concrete pavement by adding an asphalt overlay. It brings quieter driving, better skid resistance and smoother riding comfort. However, the biggest pain point of this solution is reflective cracking. Joints and existing cracks on the rigid cement slab keep opening and closing under temperature variation and repeated vehicle loads. This movement transfers upward and tears the new asphalt layer, resulting in transverse cracks, water ingress, accelerated pavement damage and frequent maintenance.
This is exactly where fiberglass geogrid stands out as the preferred interlayer reinforcement material for white-to-black projects.
Fiberglass geogrid is made of alkali-free fiberglass yarn with modified asphalt coating, featuring high elastic modulus, ultra-low elongation (≤3%), excellent thermal stability and perfect compatibility with hot asphalt mix. Laid between the old cement slab and new asphalt overlay, it solves the core difficulties of white-to-black renovation through three key mechanisms.
✅ Stress redistribution at slab jointsCement slab joints are the high-risk zones for reflective cracks. The high-modulus fiberglass grid disperses concentrated tensile stress at joint tips over a wider area, cutting the stress intensity and stopping cracks from propagating upward.
✅ Crack bridging effectThe continuous grid spans across old cracks and slab joints. When the cement slab expands or contracts, the grid locks both sides of the fracture and limits relative displacement, delaying the upward penetration of microcracks into the asphalt surface.
✅ Interlayer bonding & anti-shear performanceThe asphalt-coated surface forms tight bonding with hot asphalt. It improves the overall composite structure, reduces interlayer sliding and shear failure, and also boosts rutting resistance of the overlay.
Compared with polyester geogrid and other geosynthetics, fiberglass geogrid can withstand the high temperature of hot-mix asphalt paving without strength loss. It will not creep under cyclic thermal movement, which is critical for rigid cement base renovation.
Field engineering data shows that properly installed fiberglass geogrid can delay reflective cracking for 3–5 times longer, greatly extending the service life of the asphalt overlay and lowering the whole-life maintenance budget. It is widely used for municipal roads, county highways, parking lots and bridge deck white-to-black reconstruction.
We supply standard and self-adhesive fiberglass geogrids (25kN/m–120kN/m) for white-to-black projects. We can provide technical calculation support, test reports and construction guidance for your pavement design. Feel free to contact our engineering team for tailored solutions.


